In the actual cabinet centrifugal fan operation, the centrifugal fan trips due to various environmental and other factors are mainly caused by the following reasons:
1. The dust collector pipe is relatively short, and the valve is closed (actually a butterfly valve, which is not dead), but the resulting system resistance is insufficient to cause the centrifugal fan motor to trip;
2. Because the pipeline is too long, the valve is not closed, but the resistance is still higher than the resistance that the fan can withstand, so it trips;
3, the cause of the electrical appliance caused the fan to trip;
4. The mechanical cause causes the fan to trip;
5. Failure to fully open the fan damper will cause a trip;
6. The cross section of the duct at the fan outlet is too large, causing the shaft power required by the fan to be too high, the motor load is overloaded, and the current exceeds the rated value;
7. The reason for the small resistance of the dust collector and pipeline.
For more information, please visit the website: exhaust fan fan chassis cabinet centrifugal fan mixed flow fan http://
In order to manufacture these high-quality machines, we are supported by an ultra-modern infrastructure. This helps us to execute our production in the proper way. Also, our professionals make use of latest methodologies to deliver a range that meets the exact requirement as specified by the clients. In addition to this, owing to our ethical business policies, quality tested products range, and reasonable prices, we have increased the number of our satisfied clients.
Product discribe
It is the high efficency flame cutting equipment that adopted the CNC cutting system. Multiple equal slots can be cut at one time and be widely used in steel structure industry with slat cutting. It is a kind of ideal equipment for steel structure plate making.
Product features
Multiple guns straight line cutting at same time, cutting efficiency is high.
Bilateral drive, high transmission accuracy, operating is stability.
Frame aging treatment, stable structure and non-defrmation.
Can achieve the synchronous artificial seat, reduce the labor intensity and reduce the labor fatigue.
Can remote operation, convenient and efficency, save labour.
Automatic temper control, safty and efficency.
Product parameters
Type |
BLZT-4080(BLDH seires can be equiped lath) |
Input power |
AC380/50Hz;AC220V/50Hz |
Track gauge(mm) |
4035 |
Effective cutting width(mm) |
3300 |
Machine width(mm) |
4300 |
Track length(mm) |
8000 |
Number of standard cutting torch(set) |
2 |
Number of lath cutting torch (set) |
≤10 |
Minimum wideth of lath |
80mm |
Lift(mm) |
200 |
Cutting thickness(mm) |
Flame: 5~200 Plasma: 1~30(According to the power supply size) |
Cutting speed (mm/min) |
Flame: 100~1000 Plasma: 450~5000 |
Idle speed |
0~8000 |
Drive mode |
Bilateral drive |
System |
Shanghai Jiaoda or Beijing Starfire |
Operating accurancy |
±0.5mm |
Gantry Straight Line Cnc Cutting Machine
Plasma Cnc Machine,Cnc Plasma Cutter,Gantry Straight Line Cnc Cutting Machine,Straight Line Cnc Cutting Machine
Buluoer Intelligent Technology Co., Ltd. , http://www.buluoercuttingmachine.com