First, the purpose of cleaning and maintenance of plastic flooring in kindergartens
1. Enhance Appearance: Regular removal of dirt and grime from daily use helps maintain the vibrant look and natural shine of the elastic floor.
2. Protect the Floor: Proper maintenance shields the floor from chemical spills, cigarette burns, footprints, oil, and water, reducing surface wear and extending its lifespan.
3. Simplify Maintenance: Due to the dense surface structure and special treatments, consistent care makes the floor easier to clean and prolongs its service life.
Second, key considerations for maintaining plastic flooring in kindergartens
1. Remove all types of dirt promptly to prevent buildup and damage.
2. Avoid soaking the floor in water. Even with waterproofing measures, prolonged exposure can harm the floor. Always drain excess water using a wet-dry vacuum during cleaning.
3. Increase maintenance frequency in high-traffic areas and apply more layers of high-strength wax to ensure durability.
4. Avoid using harsh tools like steel wool or abrasive pads, which can scratch or damage the surface.
5. Place doormats at entrances to reduce dirt and sand tracked onto the floor, especially in busy areas.
Third, maintenance methods for different stages of kindergarten plastic flooring
a) Pre-use cleaning and maintenance after installation
1. Sweep or vacuum to remove dust and debris.
2. Use a scrubber with a red grinding disc and a diluted universal cleaner (1:20) to remove wax, grease, and dirt. Then use a water suction machine to remove the wastewater.
3. Rinse with water and dry thoroughly.
4. Apply 1–2 layers of high-strength wax as needed.
Tools: Scrubber, red grinding disc, water suction machine, wax mop, water press.
b) Daily cleaning and maintenance
1. Dust or vacuum the floor. Use a dusting agent and push it across the surface to absorb dirt.
2. Mop the floor with a semi-wet mop using a diluted floor cleaner (1:20). A scrubber can also be used for low-speed cleaning if necessary.
Tools: Dust mop, floor cleaner.
c) Regular deep cleaning and maintenance
1. Vacuum or sweep the floor first.
2. Apply diluted floor cleaning polish (1:20) and mop or use a high-speed polisher with a red pad.
3. Apply 1–2 layers of high-strength wax.
4. For extra shine, polish with a high-speed polisher and white pad if needed.
Tools: Dust mop, red and white grinding pads, water suction machine, wax mop, water machine.
d) Full renovation of the plastic floor
1. Vacuum or sweep the floor.
2. Apply strong de-waxing solution (1:10), let it sit for 5–10 minutes, then scrub with a red grinding disc and remove the waste water with a water suction machine.
3. Rinse with water and dry completely to ensure no residue remains.
4. Apply 1–2 layers of high-strength wax as needed.
Tools: Dust mop, red and white grinding pads, water suction machine, wax mop, water machine.
e) Dealing with special stains on the floor
1. Oil Stains: For small spots, apply a water-based degreaser directly to a cloth. For large stains, dilute the degreaser (1:10) and use a scrubber with a red disc for cleaning.
2. Black Marks: Use spray cleaning wax with a high-speed polisher and white pad. For old marks, apply a strong black offset remover directly to a cloth and wipe.
3. Adhesive or Gum: Use a professional degumming agent applied to a cloth to lift the residue.
Products: Water-based degreaser, spray cleaning wax, strong black offset remover, strong degumming agent.
What are the criteria for evaluating the quality of PVC flooring? PVC flooring is commonly used in hotels, schools, offices, sports facilities, and homes. Users often appreciate its benefits, but not all products are equal. So, how can you tell a good product from a bad one?
There are ten key factors to consider when evaluating PVC flooring:
1. Check if the product is sold in specialized stores and verify certifications such as international quality standards, environmental labels, and official inspection reports. Lack of these may indicate lower quality.
2. Examine the product information and design. Poorly printed materials with vague details are often signs of untrustworthy manufacturers.
3. Look for standardized pricing. Random or inconsistent pricing is a red flag for non-branded products.
4. Inspect the surface pattern. Blurry textures, dull colors, or unnatural patterns may indicate poor UV resistance and fading issues.
5. Evaluate the core material. A rough, dark, or easily broken core suggests substandard quality and potential health risks.
6. Test the surface finish. Using sandpaper, check for visible scratches or wear that fall below industry standards.
7. Check the seam quality. If seams are uneven or visible, the product may be of inferior quality.
8. Examine the underside of the floor. Inconsistent color, rough texture, or missing brand markings may point to low-quality materials.
9. Review the warranty and receipt. Reputable brands provide clear contact information and official documentation.
10. Verify import documents. Original imported floors have detailed customs declarations, certificates of origin, and Chinese translations. Be cautious of products with low quantities or unclear origins.
Komatsu Electrical Parts,Komatsu Forklift Parts,Excavator Electrical Parts,Quality Komatsu Electrical Parts
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.stszcmparts.com