In home electrical installations, it's essential to use the right type of wiring. For household power cords, BVV2×2.5 and BVV2×1.5 are commonly recommended. These are copper sheathed wires, with BVV2×2.5 representing two cores of 2.5 square millimeters, and BVV2×1.5 indicating two cores of 1.5 square millimeters. Typically, BVV2×2.5 is used for main lines, while BVV2×1.5 is suitable for individual branch circuits or switch lines. For single-phase air conditioning, a thicker wire like BVV2×4 is required, along with a dedicated ground wire for safety.
When purchasing wires, start by checking the packaging for the "Great Wall Mark" and the production license number issued by the China Electrotechnical Products Certification Committee. This ensures the product meets national standards. Next, inspect the outer plastic coating — it should be bright, smooth, and not easily flammable. Regular products have a vibrant color and soft texture, while counterfeit ones often appear dull and may burn quickly. Also, check the length and price. A standard roll of BVV2×2.5 should be around 100 meters, costing approximately 280 yuan. Counterfeit versions might only have 60–80 meters, sometimes with thick insulation that hides poor quality. You can estimate the actual length by counting the number of turns on the reel and multiplying by the radius. Their prices usually range from 100 to 130 yuan, much lower than genuine products.
To further verify quality, ask the seller to cut off a small piece and examine the copper core. The diameter of the copper in BVV2×2.5 should be about 1.784 mm, which you can measure with a micrometer. Genuine copper is bright red and slightly soft, while fake or recycled copper tends to be black and hard, leading to higher resistance and potential overheating. Always buy from professional stores or directly from manufacturers to ensure reliability.
Wires play a crucial role in home improvement, especially in older homes where aging or substandard wiring can lead to dangerous situations, such as fires. It’s important for consumers to be vigilant when buying, carefully checking for authenticity and quality. With so many options available, it's easy to get confused, but taking the time to do your research can make a big difference in safety and performance.
The market for wires is highly competitive, with a wide range of types, specifications, and prices. Even for similar sizes like 2.5mm² or 4mm² copper cables, prices can vary by up to 20%–30% depending on the manufacturer. Quality differences are also significant — some products may not meet the stated length or insulation standards. Industry experts point out that the main reason for these price differences lies in the raw materials used. High-quality electrolytic copper costs around 20,000 yuan per ton, while recycled copper is much cheaper at about 15,000 yuan. Insulating materials also contribute to the cost — high-quality ones can reach 8,000–8,500 yuan per ton, while inferior alternatives are sold for as low as 4,000–5,000 yuan.
Another factor affecting price is insufficient length and poor insulation quality. A genuine wire should be 100 meters long, while fake ones might only be 90 meters. Additionally, the rubber content in the insulation should be 35%–40%, but fake products may have as little as 15%. These discrepancies significantly impact the final price and overall performance of the wire. By understanding these factors, consumers can make more informed decisions and avoid unsafe or low-quality products.
Carbon Steel Non-Standard Fasteners
Taizhou TS HARDWARE Co., Ltd , https://www.shuwengroup.com