First, the ceiling: Because the water vapor in the bathroom is heavy, so we must choose those materials with waterproof, anti-corrosion, rust-proof characteristics.
Second, the ground: in the paving tiles before, be sure to do a good job of waterproofing; after the tiles are laid, to ensure that the brick surface has a drain slope (usually about 1% is appropriate), the slope toward the floor drain; the ground must be done after laying tiles Closed water experiment, the time must be guaranteed at least 24 hours; laying tiles should pay attention to the seams and alignment of the wall tiles, to ensure the overall sense of the entire bathroom, so as not to produce a visually cluttered impression.
Third, the wall: wall tiles should also be good moistureproof and waterproof, and to ensure the formation of tiling flat, and to be seamed and aligned with the floor tiles, in order to ensure the integrity of the wall and the ground; if you encounter water supply pipeline exit The incision of the tile should be small and appropriate, and the flange cover on the water feeder should be convenient to cover the incision, making the appearance perfect.
Fourth, doors and windows: the best bathroom with windows to facilitate ventilation; if there is no window, with particular attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate the return; if it is a sliding door, but also in the sliding door and bathroom Make a waterproof layer between the tiles.
V. Circuit laying: The wire joints of the bathroom must be tin-plated and must be wrapped with waterproof tape and insulating tape successively to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have a moisture-proof box, and the location Also depending on the size and location of the appliance, to ensure the use of convenient and reasonable.
Sixth, waterway transformation: Bathroom water supply and drainage line is best not to make too much changes, if you want to change, depending on the specific circumstances, such as the washing machine model, the location of the water will be different.
VII, sanitary ware installation: It is best to remember the hole distance before the decoration, according to the size of the bath, bath room, toilet, wash basin and other sanitary ware, so as not to fit in the size of the decoration is inappropriate; toilet installation should be used to sit The mud is sealed and then fixed with expansion screws or glass glue so that it can be easily repaired when the toilet is clogged.
8. Ventilation and ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must have a retrograde gate to prevent the backflow of dirty air.
9. Greening: Adding anger. The bathroom should not be a corner forgotten by the green. When decorating, you can choose some shade-resistant, hi-potted pots to be placed in the bathroom, making it a little more angry.
Decoration Waterproof Toilet Decoration Bathroom Window Switching Sockets Electrical Glass Tiles Glass Sliding Doors Glass Doors Bathrooms Sliding Doors Bathroom Tiles Bathroom Doors Bathroom Wall Tiles Bathroom Sizes Bathroom Tiles Bathrooms Wash Basins Whole Bathroom Toilets Waterproof Bathroom Doors Size Tiles Rubber
Light Duty Stainless Steel Casters:
The load capacity of light duty Stainless Steel Casters is about 70-90 kilograms, namely 154-198 pounds. For the fork of light duty stainless steel caster, it could be treated as polished with very light and never fade color, it also could be treated as brushed beyond to your be fond of. According to the material, with a variety of light duty stainless casters. Pa Stainless Steel Caster, Pp Stainless Steel Caster, Pu Stainless Steel Caster, TPR stainless caster etc..
The stainless steel we use is 304 stainless steel, It is the food grade stainless steel, which is recognized by the state. There is no harmful substance, no smell, lead-free harmless to human body health, so has very good environmental protection character; it also has good function on anti-oxygen and corrosion resistance; the surface beautiful and clean light and durable for a long time use without scratches, and it is never rust, never break.
According to the characters of stainless steel, the stainless steel caster wheels could apply to Medical equipment, Chemical industrial, Food industrial, Seafood processing and so on. The wheels can be chosen with Derlin Bearing , 404 stainless steel bearings, 304 stainless steel bearing etc. Do not use the casters while exceed their maximum load capacity, accident is always caused by overload.
As the quality, our casters have the certification proof and have received testing after production. The regular salt and spray test and load capacity test are taken in our every caster. We also have the SGS, IAF, TUV and CNAS certification to make our customers more confident about our products.
Light Duty Stainless Steel Casters
Light Duty Stainless Steel Casters, 304 Stainless Steel Caster, Pu Stainless Steel Caster, Pp Stainless Steel Caster
Ningbo Mywin Caster Co., Ltd. , http://www.mywin-caster.com