2. Insert the plug on the hand-held sensor head into the socket on the panel and tighten it. Note the positioning gap.
3. Plug one end of the power cord into the socket on the rear panel of the chassis and the other end into the power supply socket. Be sure to use the single-phase three-wire power supply.
4. Open the power switch (POWER SW.) on the rear panel of the chassis and press the SWITCHING button. The WARM UP green indicator is on and the machine can work.
5. Place the sensor head on the lid of the container and press the start button on the handle. At this time, the red HEATING indicator is on, indicating that it is heating, the sensor head should not be removed, and the red HEATING indicator light should be turned off. Go to the sensor head, wait for preparation (WARM UP). The green indicator light is on or the buzzer sounds in the machine. The next container can be closed.
6. Hold down the "SETTING BUTTON" button and set it to a suitable value, typically between 0.5-2.0 seconds.
7, choose to level the table, stabilize the machine, you can open the chassis feet so that the machine panel is easy to observe.
Coated Fiberglass Geogrid: Ultimate tensile Strengths from 30kN/m to 400kN/m,Fiberglass Geogrid range: Biaxial, flexible high modulus Fiberglass geogrid impregnated with bitumen using the knitting process.
1. It reinforce old asphalt concrete road surface and asphalt layer, and prevents damage ;
2. It is used for rebuilding cement concrete road surface into composite road surface and restraining reflection caused by block contraction .
3. It is used in road expansion and improvment project and crack caused by old and new combination position and uneven sedimentation ;
4. It is used in soft soil base reinforcement treatment , is favorable for soft soil water separation and concretion,restrains sedimentation effectivly,distributes stress uniformly and improve overall strength of road base;
5. It is sued for preventing contraction crack caused by new road semi-rigid base layer,and reinforces and prevents road surface crack caused by foundation crack reflection.
Fiberglass Geogrid
Fiberglass Geogrid, Glass Fiber, Composite Glass Grid
Feicheng Lianyi Engineering Plastics Co., Ltd , http://www.lianyigeosynthetics.com