Wooden furniture can be seen everywhere. This is a material that all of us like. Although the color of the wood is good, but we want to preserve this original beauty, we must apply a layer of wood lacquer on its surface, not only The role of protection adds to the aesthetics of wooden furniture. Everyone may feel sad because of how to brush a wooden lacquer. The following home decoration website will give you a detailed introduction to the construction process of wood lacquer .
First, the wood paint construction process guidance
1. When the wood lacquer is applied, it is necessary to ensure that the temperature is carried out under normal temperature conditions. If the temperature is too low, the paint film becomes slower; but if the temperature is too high, the brushing performance will be adversely affected. In addition, the paint should avoid moist air, especially lacquer, polyurethane paint, etc. In some wet or rainy weather, it will cause whitish and slow drying.
2. Construction under sufficient light conditions. Sufficient light helps everyone to see the lacquer surface, distinguish whether the coating film is evenly applied, and avoid leaking or sag in time. Therefore, it should be selected in a room with plenty of light.
3. Before the construction, everyone should consult the professional and need to adjust the product according to the specific requirements of the product description before proceeding with the construction.
4. After the above preparations are completed, you can polish and paint the bottom of the paint. This process is repeated three times.
Second, what are the common types of wood lacquer?
1, nitro varnish
The nitro varnish in the wood paint variety is a transparent lacquer made of nitrocellulose, plasticizer, alkyd resin and machine solvent. The nitro varnish is a volatile paint with short boring time and soft appearance. . The color of nitro varnish can be divided into high light, semi-matte and matt. It can be properly selected according to the needs. Hand-sweeping paint is a typical one of nitro varnish. This paint is specially formulated for manual construction. The nitrocellulose lacquer is first aided by Tianna water, which is a mixture of ester, benzene, alcohol, ketone and other organic solvents. When the paint film is applied, there will be a whitish scene, which can be eliminated by appropriately adding 10%-15% nitromagnet.
2, polyester paint
The polyester lacquer in the wood paint variety is a thick lacquer made of polyester resin as the first film-forming material. The polyester lacquer needs to be cured during the construction process, and the amount of the curing agent accounts for one-third of the total amount of the paint. Polyester paint has the advantages of full paint film and hard layer thickness. The curing agent in polyester lacquer is also called hardener. Its first component is TDI. TDI will turn yellow due to its characteristics. Not only will the wood furniture lacquer yellow, but it will also make the adjacent wall yellow. A major defect in grease paint.
3, polyurethane paint
The polyurethane paint in the wood paint variety has many advantages such as strong film, strong adhesion, full gloss, corrosion resistance, water resistance and wear resistance. It is widely used in high-grade wood furniture, and polyurethane paint also has Defects must first have problems such as dampening, powdering, yellowing, etc. UV wood paint is UV-cured wood paint, UV light curing, is a 21st century new trend paint. Its curing speed is very fast, and it can be cured and dried in 3-5 seconds. Construction methods include: brushing, spraying, roller coating, and coating.
Third, which are the wood paint brands?
1. Dulux, Dulux Paint Dulux is one of the well-known architectural decoration paint brands of AkzoNobel. Every year, 50 million households in the world use Dulux paint, and paint production plants in 26 countries around the world produce more than 1.1 billion liters of paint. The products are marketed in 100 countries around the world and are leading the market in many countries.
2, Nippon Paint, Nippon is a famous paint manufacturer, founded in 1881, has more than 100 years of history, is one of the early paint companies. Founded in 1962, the Lishi Group is responsible for the management of Nippon Nippon Nippon Paint in the Southeast Asia region. The business development covers 12 Asian countries and has established more than 20 manufacturing plants with more than 6,000 employees.
The construction method of wood lacquer and wall lacquer is somewhat different. We should pay attention when painting. Do not try to operate by brushing the wall. Here are two good wood lacquer brands recommended for everyone. If you want to buy it, you may want to consider it. If you want to know more exciting home improvement information, please continue to pay attention to the decoration home network.
More related wonderful reading:
How to do the construction of wood lacquer? Wood paint construction process
We are factory which specializing producing and distribute hot melt Glue Guns. Main category include 10W, 20W, 40W,60W,100W,200W, 250W with cord and cordless glue guns. All glue guns been GS,CE,KTC, SAA, CSA,INMETRO approval.
Our Professional Glue Gun designed for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY craft projects.
High Quality Hot Melt Glue Gun
Glue Guns, Industrial Glue Gun, Hot Melt Glue Gun, Silicone Glue Gun
Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com