The toilet installation steps are slightly solved, and the simple debugging is undoubted.

What should I do after carefully selecting the toilet? Let the professional check the toilet before installation, and don't let your favorite "he" be dropped. Although the channels of service-to-home have become popular, the hidden dangers that can be eliminated at the time of installation are not to appear as well. Common toilet installation, generally pay attention to the four installation steps, do you want to eliminate the trouble?

1. The receipt of the goods will be installed after the face-to-face acceptance.

The toilet should be subjected to strict quality inspection before leaving the factory, such as testing water, visual appearance, etc. Products that can be sold in the market are generally qualified products, but remember that no matter how big the brand is, it should be opened in front of the merchant. Check the goods in the box, check if there are obvious defects and bruises, and whether there is color difference in each part.

2. Check and adjust the ground water

After you buy a toilet with the same wall-to-wall size and a sealed cushion, you can start the installation. Before the installation of the toilet, the sewage pipeline should be inspected thoroughly to see if there are any mud and sand, waste paper and other debris in the pipeline. At the same time, check whether the floor of the toilet installation is horizontal or not. If the ground is found to be uneven, the toilet should be installed. Level the ground. Saw the drain so that the drain is 2mm-5mm above the ground as far as possible.

3. Debug and install the water tank fittings to check for leaks

First check the tap water pipe and drain the pipe for 3-5 minutes to ensure the clean water pipe; then install the angle valve and connecting hose, then connect the hose to the installed water tank fitting inlet valve and connect the water source to check the water inlet. Whether the valve inlet water and sealing are normal, and whether the drain valve installation position is flexible or not.

4. Test the sewage discharge effect of the toilet

Install the accessories in the water tank, fill it with water, and try the flushing of the toilet. If the water vortex is very urgent and rushes quickly, it means that the water is unobstructed. Otherwise, check if there is any blockage.

Global hardware network

Concerned about surprises

Label: toilet installation steps are slightly solved, simple debugging, leaking is undoubted

Previous: Colorful paint construction essentials and precautions Next: Oil hood, did you choose the right one?

Rare Earth Nodulizer

Rare Earth Nodulizer,Rare Earth Nodulizer Re 2.5-3.5%,Rare Earth Nodulizer Re 1.0-2.5%,Rare Earth Nodulizer 2.5-3.5%

Anyang Xinyi Alloy Co.,Ltd. , https://www.xyferroalloy.com