Talking about the installation of swing gate

In addition to the function of an ordinary swing gate, the intelligent swing gate also has a strict anti-clamping function for people, objects, and vehicles. It is suitable for passages such as bicycles, motorcycles, trolleys, and tow bags, while common swing gates often have clips. Vehicles, objects and other phenomena.

Swing gate standard product features:

1. The channel will be automatically opened after the power switch is turned off, and the power is automatically closed;

2. Intelligent swing gate has fault self-check and alarm prompt function, which is convenient for user maintenance and use;

3, can be connected with a variety of card reading equipment, receiving relay switch signal work;

4. The swing gate passes through the built-in small button on the main control board, and the operating status of the programmable device;

5, sound and light alarm functions: including illegal entry, trailing alarm; 5) anti-impact function, in the absence of receiving the opening signal, the swing arm automatically lock;

6, swing gate can be one-way or two-way control personnel in and out;

7, can be directly through the management computer to achieve remote control and management;

8, channel gate telescopic arm synchronization function;

9. The swing gate has an automatic reset function. After the gate is opened, if the swing gate is not in operation within the specified time, the system will automatically cancel the user's access permission. The swing gate wholesale standard is automatically reset after 5 seconds.

10. The mechanical structure and double sensing anti-clamping function will automatically stop or stop the motor during the default time when the telescopic arm is in the process of resetting. After the swing delay is reset by default (until reset), and Very small (≤ 2Kg).

Swing Gate Installation Tips:

1. It is best to use a 6-point galvanized pipe for the embedded line pipe. The power line is best to select the national standard cable line. It can be buried in the ground for 10 years.

2, communication line, swing gate wholesale switch control line is best to use network cable, a eight-core can access communication can also switch.

3, buried cement should pay attention not to move the line pipe, to wait for the cement to dry again wiring, swing gate wholesale underground wiring must be tight, prevent water penetration corrosion wire.

4. The wiring of the line pipe shall be divided into weak and strong electricity lines, and the swing line must be bought with an adapter. It is necessary to use two directions and three directions.

5. After the swing gate is in a good position, draw a screw hole with a marker pen, and drill a hole depth of 10-13 cm with 12 points. It is best to use bayonet wrenches for fixing screws.

6. After installation, be sure to mark the gate extension with glass glue to prevent water seepage.

7, the final detection of the operation of swing gate preparation project acceptance.

8, dark line wiring to the line tube with the ground flat (or one or two centimeters high), the rest of the wire should be set aside 80-1.1cm, convenient wiring.

Portable Inspection Camera

Welding Joint Inspection,Waterproof Camera Detection,Video Pipeline InspectionThe Pipe Inspection Camera is usually for pipes diameter from 23mm-200mm according to different camera .

Main application : automobile making,Petroleum, chemical field and other industrial pipe field.

Portable Inspection Camera

Portable Video Camera,Portable Inspection Camera,Casting Inspection Camera,Small Pipe Inspection

ZHENGZHOU JIUTAI TECHNOLOGY CO.,LTD , https://www.jiutaiendoscope.com