The reason why the integrated ceiling has become a popular trend is because of its practicality and strong aesthetics. As an integral part of the integrated ceiling lights, the utilization rate is certainly high, so it is not uncommon to replace the ceiling lights. In addition to the highly practical advantages of integrated ceilings, maintenance trouble is its biggest drawback. Today, Xiao Bian came to introduce it to everyone. How to change the integrated ceiling light, and how to change the ceiling light, replaced the precautions, and we should not change it easily, so as to avoid further problems in the later period. 
How to change the integrated ceiling light
1. Prepare suction cups or suction cups with small hooks for the removal of ceiling panels.
2. Use a suction cup to remove the ceiling plate. This time must be careful not to use too sharp objects so as not to scratch the ceiling plate.
3. Then slowly remove the ceiling buckle plate.
4. After removing the ceiling buckle plate, you can see the lighting panel, and then remove the lamp panel that needs to replace the lamp tube.
5. After the lamp panel is removed, you can take out the damaged lamp.
6. Then replace the core tube.
7. Connect the new lamp socket.
8. Install the fixture panel again.
9. Follow the appropriate procedure to restore the removed integrated gusset. 
Integrated ceiling lamp with integrated ceiling lamp replacement steps
1. Press the face mask open position by hand and the mask will automatically spring open. Then take the cover down.
2. Use a little force to pull out the broken lamp.
3. Put the new copper tube on the four holes of the socket and insert it with a little force.
4. Put the mask in the direction of the cover into the base, and press the card a bit harder. If it is not properly installed, the lamp cover may fall. 
Integrated ceiling lamp replacement notes
1. When replacing the ceiling lamp, every step must be remembered carefully. Every detail needs special attention. Because many of the materials of the lamps are made of glass or crystal, they are inherently fragile. And because of the use of time, many materials will become more vulnerable.
2. When disassembling, all kinds of materials cannot be thrown at random, because it is easy to cause damage.
3. When disassembling, pay attention to the control of intensity. Especially for parts such as gussets, forced transitions are easily deformed.
4. When removing broken lamps and installing new ones, be sure to pay attention to the direction of installation. Perhaps many people do not care much about this detail. In fact, this is very important for the use of ceilings, so we must remember the previous installation direction, if the direction is different, there will be differences in the appearance, there will be a certain color difference. 
Editor's summary: The above is Xiaobian's introduction about how the integrated ceiling light is broken and the ceiling light is broken. It's a good introduction to the replacement notes. After reading this article, we should know how to change the integrated ceiling light . It. I hope this article will help you better understand the replacement of integrated ceiling lamps.
Wpc Louvers Board Wall Panel,Modern Wpc Louvers Type Wall Cladding,Louver Wpc Wall Panel Board,Louver Decorative Composite Board Wpc Wall
Linyi Hmbyan International Trading Co.,Ltd , https://www.hmbyandecor.com