Ammonia alarm price ammonia alarm installation specification

Ammonia gas leak alarms are also a relatively large amount of gas in chemical companies. Their sales are second only to natural gas leak alarms. There are several models of ammonia gas alarms, two-wire, three-wire, and four-wire. There are three types of wiring, including QD series, RBT series, QRC series, and DX series. The market price is also very different. Our sales manager will recommend the right machine for you according to your specific needs and calculate the right price.

Then ammonia alarm purchase after installation should pay attention to what?

After correct connection, the detector cover should be fixed to meet the explosion-proof requirements.

Ammonia alarm detectors should be installed in the gas leaky place, the specific location should be determined based on the proportion of gas to be detected relative to the air.

1. When the density of the gas to be detected is greater than the specific gravity of the air, the gas detector should be installed at a distance of (30 to 60) cm from the ground, with the sensor part facing downward.

2. When the density density of the gas to be detected is less than the specific gravity of the air, the gas detector should be installed at a distance of (30 to 60) cm from the ceiling, and the sensor part should be down.

According to the density of ammonia is lighter than air, it is suitable to use the second scheme above.

â—† Detection range: 25 square meters.

â—† For proper use of the detector and prevention of gas detector failure, do not install in the following locations:

1. Places directly affected by steam and fumes;

2. Places with large air flow such as air inlets, ventilation fans, and room doors;

3, water vapor, water droplets and more places (relative humidity ≥ 95% RH);

4, the temperature below -40 °C or 65 °C above the place;

5, where there is a strong electromagnetic field.

Ammonia alarm price