No-laminate material gold / silver / white / transparent these four colors are double-sided materials, the so-called double-sided is each set of three materials, there are A, B, A points, of which A is a print material, B is medium.
First take out A material, determine the printing surface method one: the light resolution, non-reflective side of the printing surface (gold / silver reflective surface for the printing surface); judgment method two: stick wet by hand, light a piece of material A corner , can't afford film side for printing surface
Need equipment (required)
One laminator; one PVC cutter; one PVC cutter
other devices
Coder; hot stamping machine; chamfering pliers (doing non-standard cards)
Instructions
Mirror printing on the A printing surface, take out the B material, B material on both sides with a protective film, plastic peeled off before it, the printing surface facing the B material alignment, the overall order of ABA, after the overall alignment over the plastic sealing machine 130- 150 degrees, once formed, after the laminator has become frosted, the outermost polymeric film is peeled off, and at the moment the PVC card is displayed in front of the viewer as a glossy PVC card, which is passed through a PVC cutter and a PVC card cutter. Cut into standard cards. At this point, a beautiful card is produced.
First take out A material, determine the printing surface method one: the light resolution, non-reflective side of the printing surface (gold / silver reflective surface for the printing surface); judgment method two: stick wet by hand, light a piece of material A corner , can't afford film side for printing surface
Need equipment (required)
One laminator; one PVC cutter; one PVC cutter
other devices
Coder; hot stamping machine; chamfering pliers (doing non-standard cards)
Instructions
Mirror printing on the A printing surface, take out the B material, B material on both sides with a protective film, plastic peeled off before it, the printing surface facing the B material alignment, the overall order of ABA, after the overall alignment over the plastic sealing machine 130- 150 degrees, once formed, after the laminator has become frosted, the outermost polymeric film is peeled off, and at the moment the PVC card is displayed in front of the viewer as a glossy PVC card, which is passed through a PVC cutter and a PVC card cutter. Cut into standard cards. At this point, a beautiful card is produced.