ã€China Aluminum Industry Network】 Summer is coming, and many household items need to be carefully maintained. Otherwise, bad changes will easily occur in the wet summer, affecting the service life. The same is true for aluminum doors and windows in homes, and the demand is well maintained. Xiao Bian has provided seven good methods for this to help you maintain aluminum alloy doors and windows in summer.
1. Aluminum alloy doors and windows in use, the action should be light, push and pull to obey the United States; found that there is no hard pull hard push, should be troubleshooting. Accumulation of dust, deformation is the main reason for aluminum doors and windows to change the wind and easy to pull the main reasons, to adhere to the door frame cleaning, especially the push-pull tank cleaning. Vacuum cleaner can be used to suck the dust in the groove and door seal tops.
2. When cleaning aluminum alloy doors and windows, people should not step on the aluminum frame, and do not pull the frame for support.
3. Aluminum doors and windows can be used soft cloth dipped in water or neutral detergent, do not use ordinary Panyu and detergent, but can not use detergent, toilet detergent and other strong acid and alkali cleaning agent.
4. After the rainy weather, wipe the wet glass and door frames in a timely manner, paying special attention to draining the chute. Chute is used for a long time, friction force can add a small amount of oil or coated with a layer of fire wax oil.
5. The joints of aluminum alloy structures should always be inspected and bolts must be tightened in time to replace damaged parts. Positioning pins, wind braces, floor springs and other vulnerable parts of aluminum alloy doors and windows, you should always check, regularly add oil to adhere to clean and flexible.
6. The seal tops and glass seals are the key structures to ensure that the doors and windows are sealed and insulative. If they fall, they must be promptly repaired and replaced.
7. Often look at the aluminum alloy frame wall contact, as long as possible loose, it is easy to make the structure of the whole deformation, so that doors and windows can not be closed, sealed. Therefore, the screw loosening at the joint should be immediately tightened. For example, the screw foot is loose, and a small amount of cement is sealed by using epoxy glue.