1 There is no welding defect: in the conventional diamond drill bit, since the diamond piece is welded, the welded part often has a gap due to repeated friction of the chip, which is liable to cause chip clogging or chip biting, which affects tool life and surface roughness. The beam drill bit is used to sinter diamond and cemented carbide into a whole. There is no defect caused by welding, and the rigidity is greatly improved. 
2 Long service life and high machining accuracy: The beam cutting edge is made of diamond. Compared with carbide drills and diamond coated drills, the tool life is greatly extended. The diamond has excellent adhesion resistance, and therefore, a stable machined surface and dimensional accuracy of the hole can be obtained. 
3 can produce small diameter tool products: diamond and cemented carbide are sintered into one whole, can make drill bits of 0.4mm or more, and can avoid many defects of diamond welding drill bit. 
4 With a large helix angle: The beam drill has a 30° helix angle on the outer circumference of the diamond part, so the cutting sharpness is good. Compared to diamond-welded drill bits, it has a large helix angle to prevent chipping or edges at the exit of the hole. 
5 can be used for hole processing of difficult-to-machine materials: carbon fiber reinforced plastic (CFRP), metal matrix composite (MMC), graphite, boron, hard alloy, engineering ceramics, etc., due to special properties, machining with carbide drills, tools The life of the beam is extremely short. Because the cutting edge is made of diamond and has a large helix angle, the cutting resistance is small, and the above materials can be stably machined, and the tool life can be greatly extended. 
6 Re-grinding: After the beam cutting edge is normally worn, it can be reground. Usually, the flank is re-grinded. If necessary, the rake face can be reground.
Fine Tailing Handling Slurry Pump
Fine Tailing Handling Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical and general industry applications. It is including Centrifugal Tailing Handling Slurry pump, Heavy Duty Tailing Handling Slurry pump and Horizontal Tailling Handling Slurry Pump. They are designed for heavy duty applications such as mill discharge, power sector and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density slurry.
Product Features:
-Wear resistant metal or rubber wet end parts, long service life
Application Range:
Size: 25 mm to 450 mm
Maximum Heads: up to 75 m
-Wide options for Impeller
-Various types of pump seals to suit different working condition
-Grease or oil lubrication
-Discharge branch can be positioned at intervals of 45 degree
-Can be installed in multistage series
-Easy to maintain
Capacity: up to 5000 m3/hr
Tailling Handling Slurry Pump,Fine Tailing Handling Slurry Pump,Centrifugal Transfer Slurry Pump,Tailing Handling Transfer Pump
SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com