Suspension installation
The bamboo floor adopts the scientific suspension installation method, which conforms to the physical characteristics of the bamboo floor, fully takes into account the expansion and contraction factors of the cement floor and the bamboo floor, and uses the bamboo floor to be spliced ​​together.
Adhering to the ground, leaving a certain expansion joint (safety seam) around the wall, the seam is covered with the foot to keep the overall appearance of the floor, and the bamboo floor is left with a shrinking space, the bamboo floor will not be convex.
Suspension installation method, no need to play dragon skeleton, no flat plate, no glue, no nailing, no sanding, no painting (each bamboo floor has been completely closed with imported UV paint, the surface has been formed sturdy The wear-resistant layer) saves time, labor, materials and money (the cost of paving work is only one-third of the cost of wood floor coverings), and it is easy to disassemble.
First, preparation before installation
1. Level the floor and smooth it with cement slurry.
2. Use asphalt paint to paint the ground 1-2 and enlighten and dry.
3. Paving the floor with a 3mm thick foam board with plastic paper, requiring flatness, no overlap, no wrinkles.
4. Prepare 1.2×1.2cm fir strips for use.
Second, install bamboo flooring
1, the amount of good size, reasonable use of materials. All cut-off plates must be sealed with varnish to prevent moisture.
2. When laying the bamboo floor, place the fir strip (1.2×1.2cm) on the root of the surrounding wall and start paving in the longitudinal direction. The groove surface of the first bamboo floor is close to the fir strip, and then the seam is tightly pressed according to the joint of the tongue and mouth. According to the length of the room, the short board should be cut off to cover the root of the horizontal wall. Bamboo flooring is staggered across the seams.
3. After the bamboo flooring is completely installed, remove the fir boards from the roots of the cadres.
4. Cover the floor gusset with a whole piece of floor around the wall to cover the expansion joint. Use a wood screw or bamboo stick to mount the floor panel on the wall. The wood screws or bamboo sticks can be spotted with a near-color paint (or varnish). Finally, the plane on the gusset is decorated with the same thickness of wood.
special reminder:
Bamboo flooring should not be too tight to prevent squeezing. Do not use glue on the back of the bamboo floor in contact with the floor. The quality of the installation directly affects the overall effect of the floor. I hope that you can have experienced woodworking construction.
Fixed installation method
The installation floor is smoothed, dry and clean. Put a layer of oil blanket or moisture-proof paper on the ground, and fix the ordinary strip (keel) on the concrete floor. The keel spacing is generally 30cm. Spread the 1cm plywood on the wooden strip and fix it, then spread the bamboo floor on the plywood, and use a little iron to order it in the public place. The bamboo floor cuts should be cleaned to avoid rehydration. Leave a 1-1.5cm expansion joint around the floor and install the floor line.
Precautions:
First, install the floor first, and then install the floor board.
Second, please use 1.5cm thick bamboo floor to make the floor board, no hidden objects in the safety seam, so as to avoid the floor can not be stretched.
Third, the bathroom, kitchen and balcony and floor connection should be waterproof and isolated.
4. Do not step on the floor within 12 hours after the installation of the floor.
5. Do not rinse with water during maintenance. Just use a twisted mop or cloth to wipe.
6. If you accidentally pour water to the ground, please dry it in time.
7. Please close the doors and windows when going out to avoid damage caused by rain and wet ground.
8. It is recommended to put a foot mat at the entrance to reduce the abrasion of the sand and mud on the floor (you do not need to use this item if you have the habit of taking off your shoes).
Nine, the floor can be waxed at the appropriate time.
Stainless Steel Pipe,Seamless Pipe,Large Size Seamless Steel Pipes,Screwed And Socket Welding
Malleable Iron Pipe Fittings ,Steel Pipe Nipples& Coupling Co., Ltd. , http://www.nbironpipe.com