[China Aluminum Network] Aluminum ceiling ceiling is a new type of ceiling decoration material that has just emerged in recent years, because aluminum ceiling ventilation, elegant ceiling effect is very popular, in recent years, the use of aluminum The more, but some of the construction sites do not know where to start when they received aluminum ceiling tiles. Here are some of the problems encountered when aluminum ceiling tiles are suspended.
First, the aluminum ceiling through the first to determine the aluminum Fangtong specifications [including height, bottom width, thickness]
Second, after determining the color and specification of aluminum square pass, a better ceiling spacing is designed according to the height specification of aluminum square pass. Generally, the spacing between aluminum squares with low height is not too large and the spacing is too large to be effective. Hidden on the top of the water pipes, lines, air conditioning equipment and other infrastructure, the effect of the ceiling will be greatly reduced, so the design spacing is very important.
3. It is not advisable to hang along the line of sight when suspending the aluminum square pass. It would be better to cross the ceiling in the line of sight. If it looks like a slip, it is not as good as the second bar above to hide the top facilities. It is better to hang it horizontally.
An angle grinder, also known as a side grinder or disc grinder, is a handheld power Tool used for grinding (abrasive cutting) and polishing. Although developed originally as tools for rigid abrasive discs, the availability of an interchangeable power source has encouraged their use with a wide variety of cutters and attachments.
Angle grinders can be powered by an electric motor or compressed air. The motor drives a geared head at a right-angle on which is mounted an abrasive disc or a thinner cut-off disc, either of which can be replaced when worn. Angle grinders typically have an adjustable guard and a side-handle for two-handed operation. Certain angle grinders, depending on their speed range, can be used as sanders, employing a sanding disc with a backing pad or disc. The backing system is typically made of hard plastic, phenolic resin, or medium-hard rubber depending on the amount of flexibility desired.
Electric Angle Grinder,lithium electric tool
Behappy Crafts (suzhou)Co.,Ltd , https://www.craftsbehappy.com