Sauna board is used in sauna, partition wall decoration, wall panels, ceiling can also be used for bathroom ceilings, after installation requires paint to be waterproof and anti-corrosion. With the development of society nowadays, more and more sauna plate specifications , the following small series briefly introduces the sauna plate specifications and sauna board installation notes.
· Sauna specifications
In fact, the sauna plate is not only suitable for bathroom ceilings, home living room, study room, bedroom can be used to decorate the ceiling of the sauna panel, if the furniture in more colors, and home space is wider, in order to reduce the visual appearance of the empty, deep red sauna The board ceiling is the best choice to make the whole home full of woody flavor, but also brings a comfortable and warm feeling.
Sauna board ceiling must pay attention to its size, different types of sauna board specifications there is a certain difference, the following, we will briefly introduce the common size of the sauna ceiling, so that consumers can refer.
â–¶ Commonly used sizes of domestic boards: 12*85*2000mm, 12*95*2100mm, 10*85*1980mm; width 120-150mm
â–¶ Common size of imported plate: 12*95*2100mm.
·Sauna board ceiling installation notes 1, need to use wood keel
1. The wooden keel must be used for the ceiling construction of the sauna board. The wooden keel can be fixed by nails with small nail holes. After the modification, it can be hidden. The sauna board is highly moisture resistant, so the wooden keel will hardly deform due to moisture. However, we must pay attention to the selection of wood keels with moisture content, and apply fire retardant coatings.
2, reserved maintenance port
In order to facilitate future maintenance, during the construction of the ceiling of the sauna board, the maintenance port is finally left to facilitate the operation of the later maintenance, circuit inspection, etc. The maintenance port of the small space ceiling is usually in the 50*60cm, otherwise, problems will occur, it will be the entire ceiling Open up, it is more troublesome, and it will affect the appearance.
3, construction details processing
The space for the application of the ceiling of the sauna plate is generally not large, and it often causes people to ignore the details of the construction, so that the installation of the ceiling is unstable, and even the risk of collapse occurs. Therefore, the construction of ceiling panels and keels must be firm.
4, used in a suitable space
After the ceiling decoration of the sauna panel, many consumers want to install, but not all the space is suitable for installation. If the height of the room is less than 2.6 meters, there will be a sense of depression in the installation of the ceiling of the sauna board, affecting the health of the residents. The room height of 2.6 to 2.8 meters is recommended to be done around the ceiling.
Information on the specifications of the sauna board was introduced here for everyone. I hope this article will help you. If you still have anything you don’t understand, you can follow our website and we’ll get back to you as soon as possible.
Sauna Board Ceiling House Decoration Precautions Construction Installation Home decoration Precautions Decoration Precautions
Zhejiang Changxing Senda Bamboo & Wood Products Co.,Ltd , https://www.sendaflooring.com