As our living conditions are constantly improving, we are willing to spend money on ourselves in the decoration. Especially when we are decorating the floor, we like to lay wooden floors. But do we know how to lay the floor? Which, next, the decoration home Xiaobian, will introduce you to the flooring tools , and the process and skills of the flooring. I hope I can help you.
First, the introduction of floor covering tools
1. Power tools: electric hammer, pistol drill, marble sawing machine, curved chainsaw, steam pump, steam gun, electric planer, mill, belt sander.
2, hand tools: hand saw, knife saw, ink fountain, steel tape measure, square ruler, pencil, cable, hammer, axe, rubber hammer, punch, scraper, screwdriver, pliers, flat chisel, planer, steel.
3, special tools: move the hook, tighten the hook.
4, nails nailed wood floor must use twisted nails, first obliquely drilled at the mouth of the joint (hole should be perpendicular to the length of the floor strip), and then nailed into the wooden grille, otherwise the wood floor will easily cause looseness during use.
Second, the introduction of the process of laying the floor
1. Clean up the construction site, clean up the garbage on the ground, including every corner, the ground is not clean, and there is a feeling of “sand†under the floor.
2, then the ground leveling, the horizontal error can not exceed 2mm, if you exceed, you must find a way to level. If the ground is uneven, the feeling of the feet will not be good after the floor is laid. Then, the ground protrusions or uneven parts such as the edges and corners are trimmed.
3, before the sawing the floor can open the package all the way, pick out the problem or the floor to saw, so that the local problematic floor can be effectively utilized, without excessive loss. Don't come up and take the floor to saw it, it will increase the loss.
4. The glue for bonding the floor should be used for the laminate flooring. The pollution of this glue is relatively small. Do not choose non-floor adhesives on the market, which will increase the pollution source on the floor itself. Before the shop, everyone can see if the glue is right.
5, the next step is to lay the floor. When laying, you should lay a long piece on the side of a short one, so that the cross-laying floor will not be easy to loosen, and the floor will be tightened with tools.
Third, the introduction of the skills of laying the floor
If the water in the concrete floor is not cleaned before the floor installation, a certain moisture shock wave will be generated, which will cause the geothermal floor to crack, causing the floor after installation to rise, so the moisture in the cement floor is removed. Some people will say that drying is difficult to see with the naked eye, then Xiaobian here introduces a simpler test method, put a few pieces of plastic film on the paved ground, surrounded by tape, after 12 hours, such as plastic There is no moisture condensation on the film, indicating that the ground is dry.
The above is a small series for everyone to introduce, what are the tools for laying the floor, what is the process of laying the floor, the relevant content of the skills of laying the floor, Xiao Bian believes that as long as we know the tools, processes, and techniques for laying the floor, there are certain Understand, let us go to the floor, if you want to know more home improvement information, please continue to pay attention, decoration home network.
More related wonderful reading:
How to lay the floor in the home? What are the taboos when laying the floor?
Is it necessary to hit the ground keel? Ground keel introduction
Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com