First, water: pools, basins, sanitary ware, water pipes, heating, etc.
See: whether the installation of the pool, basin, and sanitary ware is smooth, firm, and straight; whether the upper and lower waterway pipelines are straight, whether the fasteners are installed, and whether the joints are leaking or seep;
Second, electricity: power lines (sockets, switches, lamps), television, telephone.
Look: Whether the power line uses the national standard copper wire, the general lighting and socket use the 2.5 square line; the kitchen and bathroom use the 4 square line, if the power line is multi-strand wire but also solder processing can be connected to the switch socket; TV and telephone The signal line should be kept at a certain distance from the power cable (not less than 250mm). The installation of the lamps should use metal hanging points, and they should be tested one after the other.
Third, tile: tile (wet paste, dry paste), stone (wet paste, dry hanging).
Look: Before the construction, we need to pre-select the pre-selection process. Divide the materials of different specifications into several categories, place them in different rooms or planes respectively so that the bricks are aligned, and use the material of the individual curling angles as the cutting material. Use lower quality materials to produce better results.
Fourth, wood: doors and windows, ceiling, closet, wall skirts, heating cover, floor.
Look: Select wood must be selected to dry the material, so as to avoid future deformation; wood to be painted with fire-resistant anti-corrosion materials can be used before, blockboard to use high quality materials. Large-scale ceilings and skirts are not less than 8 fixed points per square meter. Metal hanging points are used for suspended ceilings. Materials used for doors and windows should be made of better materials to prevent deformation. The wood on the floor should be larger (not less than 6×6)
Fifth, oil: paint (clear oil, mixed oil), paint, paste, soft package.
Look: The most important thing is the surface treatment of the decoration. The paint must be made of high-quality materials. Before the brushing or painting, the surface treatment must be done. The mixed oil is first put on the surface of the wooden device and the putty is smoothed. After the polishing, the paint is sprayed on the surface. Before the wall paint is applied again, it is necessary to use a primer (in order to block the acid-base reaction between the wall and the top coat) to prevent discoloration of the wall surface.
Three trees paint living room ceiling paint socket TV decoration switch heating floor tiles kitchen ceiling cabinets closet doors floor tiles ceramic tile specifications
The 650W 800W Jig Saw is used for Cutting Wood, Plastic Tube, Aluminum Bar, with 6 speed, 4 Pendulum Settings, Bevel Cutting 45°,Laser Function.
No burrs with good blade.
Jigsaw is the wood working power tools, Perfect for cutting curve, hole digging,can cut 3cm circle.
Portable Jigsaw With variable speed, 0-3000rpm, for different material cutting.
The Jigsaw with 20mm stoke, T-shank Blade.
The 800W Jigsaw can cutting Capacity: Wood:80mm, steel:10mm
The Jig Saw with 4 Pendulum, 0 setting for metal, 1 setting for wood, 2-3 setting for soft wood.
Jig Saw with Normal clamp chuck,Iron base.
Hand Jig Saw with a counterbalanced low-vibration plunge mechanism
Power Saw With a dust blower for max cut -line visibility.
Wood Cutting Power Tools with protection button for your safety, soft rubber handle for comfortable use.
The Jig Saw is equipped with Guide ruler, to control the cutting width.
Built-in Laser Function, for better cutting line ability.
CE/GS/EMC/ROHS certificate.
Electric Jig Saw Jigsaw,Electric Jigsaw,Power Jigsaws,Electric Jig Saws,Cordless Electric Jig Saw
Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com