Household gas alarm installation requirements!

First, install and use:

1, first determine the proportion of combustible gas and air, and then the alarm is fixedly installed in a suitable location within 1.5M from the gas source radius: A. gas: lighter than air, floating in high places; B. natural gas: lighter than air, Floating in high places; C. Liquefied petroleum gas: heavier than air, deposited in a low place;

2. After the power is turned on, the alarm sounds, and the power light is always on. The function light flashes green and turns off after about 2 minutes, indicating that it has entered the alert state. When a gas leak is sensed, it is issued.嘀 嘀 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警 报警

3, if the sensor fails, the alarm device will send out a "beep-long sound" and the function light will be yellow and long. After the fault is removed, it will automatically enter the alert state.

Second, note:

1. Do not install outdoors;

2. Do not install in places where the air flow, ventilation fan, door, etc. have a large amount of airflow;

3, do not install in more than 10 ~ 50 °C, or more humid place;

4. Do not install in places where objects separate the alarm from the gas equipment;

Welcome click to view the company's anti-theft alarm products

5, to avoid the use of a large number of solid spray adhesive, pesticides, paint adhesives, diluted alcohol, etc. near the alarm;

6. If the alarm malfunctions, do not disassemble and repair it yourself, notify the supplier or the nearest agency.

Electric&Pneumatic Ball Valve Series

Electric Ball Valve Series,Pneumatic Ball Valve Series,Electric Ball Valve,Piece Flange Ball Valve

Wenzhou KAIZHENG Valve Technology Co.,LTD. , https://www.kazevvalve.com